How Does William Shakespeare introduce the themes of love and hate in Romeo and Juliet?

In Romeo and Juliet, Shakespeare shows beautifully constructed language in the Prologue and Act 1:1 to illustrate the love of the `star crossed lovers` and the hatred shared from the Capulet's and the Montague's, the ongoing rivalry over something feeble enough that it doesn't even need to be explained of how it came about. Throughout the play, we see how the love collides with the hate in a way that teaches the two households how imbecilic the situation is. Not only has Shakespeare used elegant language, but he has also used a number of techniques to present the key themes. The prologue, something that is already usually written as a love poem, has been interpreted in many different ways and as I read the script, I even think of other ways it could be displayed. The Prologue is traditionally 14 lines long, each line holding roughly 10 syllables each. â€Å"Two households, both alike in dignity.† The Rhyming scheme is A, B, A, B, C, D, C, D, E, F, E, F, G, G (the last lines ending on a rhyming couplet). There are four sections in the Prologue (traditionally in a sonnet), but Shakespeare has written it in a particular way so that it can be broken down into three sections. The different sections establish different things. The first one introduces the setting of the play â€Å"In fair Verona (where we lay our scene)† This shows the Prologue as being some sort of a trailer for the play. The next section familiarizes the plot and also involves some conflict into the story: the hate of the two households mixed with the love of the two teenagers. â€Å"Doth with their death bury their parents' strife.† This automatically throws caution to the audience and turns Romeo and Juliet from a regular play, into a love tragedy. Shakespeare allegedly wrote 37 plays and they have been broken down into three categories: Comedy, Historical and Tragedy. Tragedy is very affective because of the dramatic effects that can be produced from it. Shakespeare was masterful at involving different dramatic effects through techniques. A key contrast of tragedy and comedy is that the tragedy's main characters are often portrayed as very heroic and selfless ones, as to add the sense of seriousness to the script, whereas with his comedy plays, this of course did not matter. One of Shakespeare's techniques can be easily found in the Prologue and is reoccurring in Act 1:1 is the use of Oxymorons. An oxymoron is a phrase, usually two words placed next to each other in a sentence where the two words are usually contradictory. Oxymoron is an oxymoron in itself, for the oxy is Greek for sharp and moron is Greek for dull. An example of an oxymoron in the Prologue is: â€Å"The fearful passage of their death-marked love† The final section of the Prologue states that the decease of the â€Å"star-crossed lovers† that are Romeo and Juliet is the only way to end the rivalry. â€Å"Which but their children's end nought could remove.† The final three lines of this tantalising opening to the play are talking directly to the audience: â€Å"The which if you with patient ears attend.† This enforces the idea of the Prologue being a trailer even more. The originally chorus spoken Prologue has been interpreted in many different ways. In Franco Zeffirelli's 1968 version, the film opens with the Prologue being narrated. This is delivered calmly, as to give the fight as more of an jolt to the audience afterwards. Baz Luhrmann first presents the Prologue as a news report. This gives off a modern day equivalent of the Prologue, showing instantly how Luhrmann has decided to direct the film. After the news report, the prologue is repeated as an over voice. The voice gives off the same omniscient feel as in Franco Zeffirelli's version as it has been placed in the hands of Friar Lawrence. This is a cleverly picked character, as it is one who has an alliance with God, and therefore appears even more Godly. The Prologue is such a crucial element to the script, as it outlines the entire play and foreshadows future events; therefore the way different productions have presented is very important. Act 1:1 starts with Samson and Gregory in `a public place`, acting jokily and being troublesome. This is apparent from when `two serving men` from the house of Montague enter. Different interpretations of the characters entrances symbolize what the directors see the characters as. In Luhrmann's version, the Montague's and Capulet's are described as the â€Å"boys† giving the sense that the rivalry and arguments of the two households are pretty petty and childish. The `Montague Boys` act in a childish way themselves, which creates a great contrast to the other, deadly serious half of the scene. It also makes a huge contrast to the Capulets when they enter. Their characters are shown as unsympathetic, merciless and ruthless men. Luhrmann again represents the modern day version by setting the fight in a petrol station. Zeffirelli's version is much more minimalist. The entire scene is set in a market, where Sampson and Gregory and striding through arrogantly. As the two households meet eyes, each character's obnoxiousness increases. â€Å"Do you bite your thumb at us, sir?† â€Å"I do bite my thumb, sir.† This quarrel between Abram and Sampson opens the argument, unraveling the entire scene. Benvolio (a Montague), enters an argument and as Tybalt confronts, the fight commences. It is soon called to a halt, as the Prince arrives and attempts to make himself heard. Again, in this speech, Shakespeare uses something similar to an oxymoron – an antithesis. This is where the opposite words aren't necessarily placed together. He uses this is in the first line of his speech: â€Å"Rebellious subjects, enemies to peace.† â€Å"Profaners of this neighbor-stained steel† This is referring to their swords. This measly attempt to end a fight that has developed so greatly has failed, and so he tries again. Here we find another technique of Shakespeare. â€Å"Purple fountains issuing from your veins† Here he has used `fountains` as a metaphor for blood. A fountain, where water is provided, water is a traditional symbol of the source of life, so a fountain of blood is now transformed into an image of horror. Shakespeare also describes the quarreling households as `beasts` to denote his anger and how confused he is of such beastliness of them (this emotion is greatly shared with Romeo later in the play). â€Å"Throw your mistemper'd weapons to the ground.† The weapons are â€Å"mistempered† in the sense that they are angry, that is, used by angry men. In the Prince's speech, we encounter the first talk of past encounters of Montague and Capulet: â€Å"Have thrice disturb'd the quiet of our streets.† The â€Å"disturbance† has prevented any peace for the two households, but throughout the entire play there is not any word of how the disturbance came about to begin with. However, there are clues as to what it could be. For example, there is a running theme of religion throughout the play, with the powerful character of Father Laurence and the religious attitudes of the households, with the church being a reoccurring set; could religion be the reason for the rivalry? When the fight had been calmed by the Prince and when the air was cleared, Lady Montague asked: â€Å"O where is Romeo? Saw you him today?† Romeo, one who has not been involved in this `quarrel` in anyway, is still pining over his current love: Rosaline. As Romeo enters the scene, he is filled with love. As he talks with Benvolio, thoroughly disappointed with the fight that had just occurred, through Shakespeare, oxymorons are reintroduced. Romeo does not comprehend the ongoing rivalry, the torment and hatred and so he says: â€Å"Feather of lead, bright smoke, cold fire, sick health† This is poetically used to contrast the household's violence to his love for Rosaline. As the plot moves on, the love for Rosaline is replaced by Juliet, where the love is much greater, and as the love grows, uncannily, the rivalry grows at the same scale. The theme of Romeo's hastiness is clear as he jumps from love to love, and again clear as he rushes into marriage with Juliet. Romeo and Juliet has such a big mixture of emotions because it has three excessive themes that all join in together ruining the paths of each character. These themes are: tragedy, romance and rivalry and they keep Shakespeare's most familiar tragedy one of the most interesting and enchanting script of all time.

The Truth of Obama Care

Obama care 1 The Truth of â€Å"Obama Care† American National Government/ POL201 Nicole Emery Instructor: David Williams Obama Care 2The Truth of â€Å"Obama care† Obama Care is the unofficial name for The Patient Protection and Affordable Care Act which was signed into law on March 23, 2010. In a more general sense Obama Care and the Health Care for America Plan or any such name is a reference to the ongoing health care reform under President Obama. (http://obamacarefacts. com/whatis-obamacare. php) The ACA is landmark legislation designed to increase access to health care coverage for millions of Americans. Wizemann,2011) This legislation represents one of the largest and most comprehensive reforms to the American health care system since the enactment of Medicare and Medicaid in 1965. The ACA seeks to extend coverage to roughly 50 million uninsured Americans, slowing down the growth in the cost of health care, and improving the quality of care health care by chan ging the delivery system. ( Some people who oppose the Act are concerned that it gives the Federal government too much control over personal health care decisions and benefits, forcing a complex one-size-fits-all health system onto the states.Some people who are in favor of the Act want lower health care costs overall by making it affordable for more people. The Patient Protection and Affordable Care Act of 2010 significantly changed health care in the U. S. , making insurance available to 32 million more Americans — a total of 95% of the legal population. The Act, is being phased in over four years. By 2014, every citizen will be required to have health insurance, or face a penalty. However, they can choose how to get coverage.If they already have a plan, either through their employers, Medicaid, Medicare, or privately, they can keep it. Those who can't currently get health insurance will have additional options. They can purchase it from a state-based health insurance excha nge (and possibly get subsidy) or they may be eligible under expanded Medicare guidelines. Obama Care 3 The program is originally designed to add to the federal budget $930 billion dollars.The act was designed to offset the budget by lowering payments to hospitals, Increasing Medicare taxes on higher income households, assessing penalties on employers who don't offer, and individuals who don't take, health care insurance, assessing taxes on various health related activities, and reducing overhead by consolidating the higher education loan program with the Pell Grant program. Although there has been tremendous opposition before; during and after its becoming law, the Supreme Court ruled it was constitutional that all U.S. citizens must purchase health care insurance from a private carrier, or pay a penalty, is for the right for congress to impose a tax. Even with our house of representatives trying numerous times to repeal the law and still keeps getting over ruled. The opposition h as been so great that many Americans think the law has already been repealed. I am sure you are asking yourself what does this mean, when does this come to affect and how does this affect you? Here are the changes that happened in 2010.Medicare beneficiaries who fell into the Medicare Part D Prescription Drug â€Å"donut hole† received a $250 rebate. They received a 50% discount on brand name drugs in 2011 and the doughnut hole are eliminated in 2020. Children were allowed to stay on their parents' health insurance until they turn 26. New private plans were required to cover preventive services with no co-payments, and they are exempt from deductibles. Consumers who applied to new plans have access to an external appeals process if coverage is denied. Insurance ompanies were prohibited from dropping coverage if someone got really sick. They couldn't create lifetime coverage limits. They could no longer deny coverage to children with pre-existing conditions. The same will appl y to adults in 2014. Until then, adults with pre-existing conditions who have been denied coverage will get access to temporary health insurance coverage until the exchanges is set up. These are the changes that happened in 2011Medicare-covered preventative services were Obama Care 4 xempted from deductibles and the co-pay was eliminated. Insurance companies must prove they spent at least 80% of the premium payments on medical services, rather than on things like advertising and executive salaries. Those that didn't were required to provide rebates to policyholders. States were funded to require health insurance companies to submit justification for all rate hikes. Funds were expanded to increase the number of doctors and nurses, and more community health centers — enough to double the number of patients they can treat in the next five years.These are future changes to look forward to. Medical expenses must be at least 10% of income before they are deductible for those under 65. Manufacturers and importers of medical devices will pay a 2. 3% excise tax. Federal funds will increase to allow Medicaid to offer free preventive services, and to extend CHIP for an additional two years. The Federal government will fund states to pay primary care physicians 100% of the Medicare fee. Medicare will start a pilot program to encourage hospitals to bundle services before submitting for payment.Additional taxes will be paid by the 1 million people who make more than $200,000 and the 4 million couples filing jointly who make more than $250,000. Specifically, they would pay 3. 8% Medicare taxes on dividends, capital gains, rent and royalties and 2. 35% (up from 1. 45%) Medicare taxes on income. In 2014, the state-run health exchanges will be set up. Medicaid eligibility will be expanded to include those with incomes up to 133% of the Federal poverty line ($29,000 for a family of four). New subsidies will become available for with incomes up to 400% of the poverty leve l ($88,000 for a family of four).Those who don't purchase insurance will be assessed penalties: 2014 – The greater of $95 or 1% of income. 2015 – $325 or 2% of income. 2016 – $695 or 2. 5% of income. Businesses with 50+ workers must pay $2,000 per worker (except for the first 20) if they don’t offer health insurance. Those that do receive a tax credit of 50% of the premium cost. (Donmoyer, 2012 ) Obama Care 5 References: Wizemann, Theresa.Health Literacy Implications for Health Care Reform: Workshop Summary. Washington, DC, USA: National Academies Press, 2011. p 5. http://site. ebrary. com/lib/ashford/Doc? id=10488622;ppg=19 Copyright  © 2011. National Academies Press. All rights reserved. http://obamacarefacts. com/whatis-obamacare. php The Affordable Care Act Turns Two,Lee Goldberg, Sabiha Zainulbhai, http://www. nasi. org/discuss/2012/03/affordable-care-act-turns-two? gclid=CLOuyv-9vrICFURxQgod3TwALA March 2012 HealthReform. gov, Ryan Donmoyer, â₠¬Å"New Health Care Taxes,† Bloomberg, March 22, 2010) Article

Definition of modeling terms Essay Example | Topics and Well Written Essays - 500 words

Definition of modeling terms - Essay Example Spreadsheet engineering is the study of modeling that enables us to plan and develop more complex and detailed business models. The study also facilitates business communication especially performing modeling tasks and accounting statements in effective and efficient manner. Model formulation is to removing needless details and abstracting critical features of the real world. It is a development for making the actual situation understandable, easier and capturing a core objective of solving a real world problem. Decisions are to make up your mind for selecting a way forward keeping in view the possible alternatives. The decision can be taken on the number of items to buy/sell, quantity of items to be manufactured Problem Context is an activity of modeling that explains the fundamental causes and the current situation of the problem raised by the modeler. It should be structured considering the client’s view of the problem so that they can guide to a solution. Model structure is an activity of modeling in which a modeler builds a model by selecting/ inserting items, values and their relationship in the spreadsheets considering options of using model types, breaking the problem into sub-problems. Model assessment is an activity of modeling in which the developed models are evaluated to find out either they are viable, suitable and satisfactoriness keeping in view the problem of the client and objective of their

Film Analysis Essay Example | Topics and Well Written Essays - 750 words

Film Analysis - Essay Example The film portrays him as a counterculture individual defining the field of rock and roll of his time. The film’s depiction of Jim Morison goes beyond the iconic traits. He is portrayed as an alcoholic star with interests in the spiritual plane. He indulges in hallucinogenic drugs and has a growing obsession with death. Mise-en-scene The plot of the movie begins with an instance Jim Morison was recording his album, the American Prayer. The scenes quickly shift to years back when Jim Morison was a child. The memory of his family driving along a desert highway crops up. The younger Jim Morison seems like an elderly Native American about to die by the roadside. The movie picks up when Jim Morison arrives in California and he assimilates into Venice Beach culture and joins UCLA to study. He then meets Pamela Couson, his girlfriend. The origin of the Doors begins when Morison meets Ray Manzarek. Later in the film, the audience is introduced to Robby, John Densmore and Krieger. As th e movie progresses, Jim Morison convinces his band mates to take a trip to Death Valley. In the Death Valley, the band experiences the effects of psychedelic drugs. On their return to Los Angeles, the band plays several shows in famous clubs of the time. In particular, their performance at a nightclub Whisky a Go Go earns them a rapid growth of fan base (Stone, 1991). Jim Morison’s occasional improvised lyrics and on-stage antics raise the ire of night club owners. The popularity of the band continues to escalate, nonetheless. The movie does not give viewers the true picture of what made Morrison tick in his age and time. Even though the movie did a lot of staff the right way, the director left out a lot of positive moments in Jim Morrison’s life. Stone concentrated on the ugly moments Jim portrayed miscalculated actions marred with drugs and alcohol. An instant in the plot of the film that does not correspond to the true life of Morrison include the joining of the ban d by Robby Krieger. In the film, the director portrays Morrison as having the full band from the onset. The members included Robby Krieger. In real life, Robby Krieger joined the Door many months after the band began. In addition, Jim asks the bartender for Dos Equis. This was ages before the brand was imported into the United States. The drink was imported into the states for the first time in 1973. While taking a shower with Jim in New Haven, Connecticut, Patricia mentions that Jim attended University of Florida. In real sense, the artist attended Florida State University. Misconception in Characterization Screenplay of the Door is based on real people and events. Even though a number of the episodes explored in the movie are based on the lives of the people, some instances portray the visions of the director and dramatized events. An example of the dramatized events in the movie is the moment Jim is asked to change the lyrics of his famous song, Light my Fire. This special reques t for appearance on the Ed Sullivan Show depicts the artist as a blatant, non yielding individual. The movie depicts the artist as a defiant man, shouting the word â€Å"higher† on TV. In reality, Morrison had shouted the word â€Å"fire† during his lifetime. During his lifetime, Morrison had clarified that the incident was meant to change the lyrics of his song during a live TV performance, but was too nervous to make the change

Total Quality Managment Research Paper Example | Topics and Well Written Essays - 1750 words

Total Quality Managment - Research Paper Example The increased pace of technological development, complex customer demand as well as local and global market competition have turned out to be more sophisticated and intense, complicating the overall business activities. To counter the ever increasing contemporary business challenges, a good number of modern global organizations have embarked on utilizing TQM, which presents numerous opportunities. Using resources in the expansion and technologically oriented approaches in their daily business undertakings. This contributed to numerous quality management standards such as Total Quality Management. This paper explores issues regarding TQM and its benefits as a management approach for organizations. Total quality management has numerous advantages. TQM is an effectual and variable management system restrained not only in the quality assurance department, but also in the entire organization businesses. Therefore, Total Quality Management can be implicated to be an incredibly influential intervention mechanism that can last for an extended period of time if properly managed and modified to lime with emerging technology and demands (Evans, 2011). Total Quality Management is based on four major philosophical assumptions. For a starter, Total Quality Management is presumed to be cheap compared to the other conventional mechanism and it is incredibly decisive for long term development of an organization. Secondly, employees are always concerned about their responsibility in improving the quality of the product and service delivery. Therefore, employees only require to be provided with the necessary tools, skills, and maximum respect from the management to improve their performance. Thirdly, the entire organizational system is composed of highly independent sections. For this reason, the crisis in one section affects extensively

Influence of National Culture in the Marketing Strategy of Western Dissertation

Influence of National Culture in the Marketing Strategy of Western Supermarkets Entering China - Dissertation Example It was important to understand this relationship, so as to analyze the effect of the same on their grocery buying habits. The research questions for the research were also selected based on the objective of the study. The questions were mainly related to the Chinese and UK culture and their major similarities and differences, the influence of cross-cultural differences on the buying habits of the people and the behavioral pattern of the Chinese consumers. The literature review was designed keeping in mind the different cultural models. With the help of these cultural models such as Hofstede’s 5 D model, Kluckhohn and Fred Strodtbeck Model, and Trompenaars’ Seven Dimensions Model has been utilized to describe the nature of Chinese consumers and the Chinese culture. An equal comparison has also been drawn with the culture of UK, to show the difference. For conducting the research on the decided problem areas, a qualitative method has been utilized. Qualitative research me thod has been used because the research study focuses on culture and its effect and a qualitative analyze would be best in this case. The research is conducted in two phases. In the first phase an interview session is done with the marketing managers of the three chosen supermarkets and in the second phase a questionnaire survey was conducted by choosing a sample size of 500. These respondents are the customers in China and UK. After conducting the survey and conducting an interview with the managers, it was found that the Chinese culture is tradition and UK’s culture is much modern. In China relationships, family, group shopping and friend matter a lot even in case of shopping, while in UK these things does not play any significant role. Table of Contents CHAPTER I – INTRODUCTION 7 1.1Aims and Objectives of the Study 11 1.2Problem Statement 12 1.3 Research Questions 12 CHAPTER II – LITERATURE REVIEW 13 2.1 Definitions of Culture 14 2.2 Chinese Culture using Klu ckhohn and Fred Strodtbeck Model 14 2.2.1 Relationship with Nature 15 2.2.2 Relationship with People 15 2.2.3 Human Activities 16 2.2.4 Relationship with Time 16 2.2.5 Human Nature 16 2.3 Chinese Culture using Hofstede’s 5-D Model 17 2.3.1 Power Distance 18 2.3.2 Individualism 19 2.3.3 Masculinity / Femininity 19 2.3.4 Uncertainty Avoidance 20 2.3.5 Long term Orientation 21 2.4 Chinese Culture using Trompenaars’ Seven Dimensions Model 22 2.4.1 Universalistic vs. Particularistic Culture 23 2.4.2 Individualistic vs. Collectivistic Culture 23 2.4.3 Neutral vs. Emotional Culture 24 2.4.4 Specific vs. Diffuse 25 2.4.5 Achievement vs. Ascription 25 2.4.6 Sequential vs. Synchronous Time 26 2.4.7 Internal vs. External Control 27 2.5 Hall’s Cultural Dimensions and Chinese Culture 27 2.5.1 Context 28 2.5.2 Space 28 2.5.3 Time 28 2.6 Schwartz’s Cultural Dimensions 29 2.6.1 Conservatism-Autonomy 29 2.6.2 Hierarchy-Egalitarianism 30 2.6.3 Mastery-Harmony 30 2.7 Cross Cultural Differences Influencing Consumer Behavior Patterns 30 2.8 Summary 34 CHAPTER III – RESEARCH METHODOLOGY 35 3.1 Introduction 35 3.2 Justification for Methodology 35 3.2.1 Qualitative Methodology 36 3.2.2 Case Study Research 38 3.2.3 Semi-Structured Interviews 38 3.3 Data Collection Instruments 39 3.3.1 Construct Validity 39 3.3.2 Internal Validity 40 3.3.3 External Validity 41 3.3.4 Reliability 41 3.4 Sources of Data 43 3.5 Administration of Procedures 44 3.6 Ethical Considerations 44 3.7 Summary 44 CHAPTER IV- DATA ANALYSIS and FINDINGS 45 4.1 Findings 45 4.2 Data Analysis 48 4.2.1 Interview 48 4.2.2 Questionnaire Survey 56 4.3 Summary 57 CHAPTER V –

Mitochondria, Chromosome, and Plant Structures Assignment

Mitochondria, Chromosome, and Plant Structures - Assignment Example The outer membrane can fuse with Endoplasmic Reticulum to form Mitochondria associated ER- membrane that helps in calcium signaling and lipid transfer. b) The intermembrane space is the region between the outer membrane and the inner membrane. Due to the permeability, of the outer membrane, the concentration of sugars and ions in the intermembrane space should be similar to that of the cytosol (Stansfield 89). The main function of this compartment is oxidative phosphorylation. c) The inner membrane contains a lot of proteins that perform different function. It has a very high protein to phospholipid ratio of 3:1. The proteins in this compartment include ATP synthase that produces ATP in the matrix, transport proteins that control the passage of metabolites in and out of the matrix and those that are involved in oxidative phosphorylation. d) The cristae are numerous compartments in the inner mitochondrial membrane. It is studded with enzymes such as ATPsynthase and cytochromes (Stansfield 92). Their function is to expand the surface area of the inner mitochondrial membrane to facilitate for better production of ATP. e) The matrix is a component of the mitochondria that is enclosed by the inner membrane. It contains most of protein in a mitochondrion. This compartment is important in the generation of ATP. There are numerous enzymes, mitochondrial DNA and mitochondrial ribosomes contain in the matrix. 2) Chromosomes are well arranged structures of DNA and protein found in the cells of most living organisms. During the life of a cell, chromosomes elongate and are easily visible under a microscope. Before a cell divides through mitosis, each chromosome duplicates during the S phase of cell cycle. a) On the onset of mitosis, the duplicate chromosomes condense into short structures called dyads. The chromatids condense to about 5 Um in the metaphase. The chromosomes assemble on the metaphase plate that is equidistant to the poles (Stansfield

Love Assignment Example | Topics and Well Written Essays - 2500 words

Love - Assignment Example The main activities of the program that will be undertaken within Bonnie Brae Residential Facility include counseling, parental training, individual and group mentoring among others. Some of the key parties that this project will rely on are parents, clinical officers, law enforcers, mentors, local support agencies, residential staffs and members of the community. With the financial assistance from the federal government, the program is focused at attaining positive outcomes that include improved skills, behavior change, high self esteem, determination and increased income for the adolescent males. Proper planning, controlling, management and effective coordination are some of the major aspects that determine the success of a project. One of the duties of a project manager is to oversee proper use of financial resources that are given by federal government or grant making foundations. In addition, project managers must ensure that the objectives of their projects are in line with the needs of the target population. In this way, projects will enjoy the support of the members of the community as well as the government. Based on the wide range of activities that are undertaken to make a project successful, it is paramount for regular evaluation of the goals to avoid deviation and loss of resources. In the contemporary world juvenile delinquency has become a major security threat. In their efforts to curb the negativities associated with illegal behaviors by young people, various rehabilitation centers have been established. Although government authorities allocate adequate funds to oversee the running of the treatment centers, crime rate in many countries remain high. This means that there is a gap that exists in the process of transforming the young people to become responsible adult. This paper analyzes the major aspects that will be covered by a program that aims at improving

Public Affairs and relgious beliefs Research Paper

Public Affairs and relgious beliefs - Research Paper Example ever, there are a number of other smaller religions that are formed as a result of differences of beliefs concerning the doctrine of the major religions and thus, a sect of people break away from the main religion to start their small religion. Basically, religious beliefs are founded on faith of certain doctrines as taught by the respective religions so the believers of those doctrines are supposed to believe the teachings as they are without much questioning. For instance, religion has greatly contributed to the spread of HIV and AIDS. Some religions for example Catholics discourage the use of condoms hence its follows can engage in unsafe sex contributing to the spread of the pandemic (Apostolidis & Juliet, 2004). Also some of the Africa beliefs provided for the use of one surgical instrument when performing circumcision hence a risk in the spread of HIV and AIDS. Christian teachings tend to brain wash people into a certain school of thought in whom they cannot easily get themselves out of since they are bond by doctrines which they are supposed to follow to the letter without questioning their legitimacy or logic (Apostolidis & Juliet, 2004). Religion is a major impediment when it comes to solving social affairs in the public arena. For instance, politicians who are majorly the policy makers in countries will be limited to the scope of issues they will discuss and polices that will be formulated since is one is strongly affiliated to a certain religion the doctrines to that religion will in most of the time coincide with the policies being formulated thus, creating a deadlock of whether to adhere to religious teachings and doctrine or formulate polices that are against the religious teachings but for the common good of the general public. The utilitarian theory advocates for something to be regarded as ethically correct it has to be done so that benefit is for the greatest number of people. Thus, religion should not act as opium that impedes service delivery

History Essay Example | Topics and Well Written Essays - 750 words - 1

History - Essay Example 1). The term 'Black Death' can refer to either the pneumonic plague or the bubonic plague. â€Å"The pneumonic plague is the deadlier of the two diseases killing its victims is two to three days† (Spielvogel, 2003, p. 275). It was strongest in the larger cities because of the dense populations that lived there and the less sanitary conditions that could be maintained in these urban areas. â€Å"The plague would visit an area, last for about a year, kill about one-third of the population, and move on. †¦ Most historians believe that between 1347 and 1351, at least one-third of Europe’s total human population (20 to 30 million people) died† (Piccolo, 2004). Deaths alone were not the only by-product of the Plague, though. The way the church handled the crisis and the large number of deaths that took place affected the economic, social and political landscape of this large region of the world. The first outbreak of the plague was strongest in the poorer sections of the city because these people were more likely to live in unsanitary conditions and had limited means by which to protect their health. Modern science is able to confirm the Plague was spread by the rat flea who took the disease from the rat and spread it to the human population, so areas that were infested with rats were among the first to show symptoms (Gottfried, 1983). ... Frightened churchmen shut up their churches and fled to the country as did many people in the secular world (Luftus et al, 1999). Because of their ineffectiveness in the crisis, the church lost a great deal of its authority and leadership and the people began to question whether it should ever have held that position. Many people assumed God was angry with them and much more penitent and harsh religious practices were developed to appease God’s wrath through sacrifice. Economic conditions changed dramatically as competitors from other countries entered the market through the development of the guilds. The guilds changed economic conditions for individual citizens and introduced another means by which cities and towns might be run. â€Å"The effects of regression on rural economy were far-reaching. Labour was scarce and wages rose rapidly. In England and in Castile and elsewhere legislation was attempted to fix wages, but without success† (Nohl, 1926, p. 20). Workers, es pecially peasants who were finally making a decent wage, rebelled violently to suggested pay reductions and though the intent was sound, its affects were disastrous. At the same time that the Plague was decimating the population, the faith in the One Religion and changing the economic base of entire nations, the Catholic Church was engaged in an all-out war on itself. Pope Clement V declined to move to Rome when he was appointed in 1305 and moved the papacy to Avignon supposedly because of civil unrest in Rome, but more likely so he would be closer to the French monarchy he served (Menache, 2002). By 1378, this had become a problem. After struggling against a highly suspicious and

Quakers Case Essay Example for Free

Quakers Case Essay This research paper will argue that the evangelicals were embraced mostly by blacks not only because it’s the nearest imitation of their African nature rituals but because they have given support to the abolition of slavery in the United States. Quakers were known to be the most vocal concerning their opposition to slavery; there were also other denominations that did not favor slavery. George Fox, founder of the Quaker group Society of Friends, preached against slavery in the late 16oo’s, but never really took action against it. Even though Fox, a major Quaker leader, was opposed to slavery, other Quaker leaders owned slaves. This was because they interpreted the doctrines of their religion to exclude slaves. The institution of slavery became a divided issue among Quakers in the Society. Benjamin Lay, for example, was against slavery. Methodists, Baptists, and Presbyterians were very vocal concerning their dissatisfaction with slavery. (1) However, the main concern was that large amounts of the population were not being exposed to God. They had to resolve whether the larger concern was to end slavery and thus allow many â€Å"unchristian people to go to hell after death, or to evangelize the slaves while letting the issue of slavery slide under the carpet. Subsequently, Methodists and Baptists also became the two denominations to achieve the earliest successes in proselytizing slaves (Lane 184). The first third of the nineteenth century was a significant time for antislavery. Haitian slaves had risen up and freed themselves from French rule in 1803. In England, decades of antislavery agitation led Parliament to abolish slavery in the British Empire by 1834 In the United States, sectional friction related to slavery began in earnest with the Missouri crisis of 1820. Nor were black voices silent. Free African American ministers sermonized against slavery’s cruelties. Periodic fears of slave violence came to a head in 1822 with the discovery of Denmark Vesey’s planned slave uprising (2). As the conflict over slavery heated up, and as news of the Vesey conspiracy broke in 1822, and word spread about the rebellion of Nat Turner in 1831, a great fear enveloped whites (5).   All these factors caused a few whites to begin to renew the spiritual struggle against slavery. The Reverend George Bourne, an Englishman who headed a Presbyterian congregation in Virginia, refused communion to slaveholders and excoriated slaveholding ministers. Way back 1784 Methodists were so bold as to say that they promised to excommunicate all Methodists not freeing their slaves within two years (5). Opposing racism is definitely amongst the strongest reasons for the abolition of slavery. This argument seems quite feasible, considering the fact that only Negroes were slaves. That is to say, skin color was the most deciding factor in whether somebody was a slave or a slaveholder (1). Catherine Meeks, professor of African American studies at Mercer University in Macon, Georgia, says, It was the white control of the worship [on slave-holding plantations], the inability to accept blacks as equals, and the negation of black personhood that led to the separation of the black church from the white church and to the emergence of a black religious community. (4) Independent black churches—most of them Baptist or Methodist—were not separating themselves from whites because they held a different doctrinal view of Christianity, notes James H. Cone of Union Theological Seminary. Without exception, blacks used the same articles of faith and polity for their churches as the white denominations from which they separated. Separation, for blacks, meant that, they were rejecting racism that was based on the assumption that God created blacks inferior to whites. (5) Even though white Protestant denominations in the 1840s split over the issue of slavery, the congregations of northern Protestants remained just as closed to blacks who moved north. Given the increasing racial proscription in the mid-1800s, (9) Many Black preachers developed a significant following across the South among both whites and blacks. John Jasper of Virginia was one such man. Slaves would defer funeral ceremonies for as long as necessary to bring him to the plantation for the service. And Jasper was equally popular among whites. During the Civil War, Jasper won a warm response from the Confederate wounded to whom he preached and offered solace (9). A long history of antislavery and political activity among Northern black Protestants had convinced them that they could play a major role in the adjustment of the four million freed slaves to American life. In a massive missionary effort, Northern black leaders such as Daniel A. Payne and Theophilus Gould Steward established missions to their Southern counterparts, resulting in the dynamic growth of independent black churches in the Southern states between 1865 and 1900 (10). Predominantly white denominations, such as the Presbyterian, Congregational, and Episcopal churches, also sponsored missions, opened schools for freed slaves, and aided the general welfare of Southern blacks, but the majority of African-Americans chose to join the independent black denominations founded in the Northern states during the antebellum era. Within a decade the African Methodist Episcopal (AME) and the African Methodist Episcopal Zion (AMEZ) churches claimed Southern membership in the hundreds of thousands, far outstripping that of any other organizations. They were quickly joined in 1870 by a new Southern-based denomination, the Colored (now Christian) Methodist Episcopal Church, founded by indigenous Southern black leaders (11). The relentless evangelist figures were catalysts of the constitutional abolision of the slaves. They fought for the freedom through the exposure to God’s theoretical equality. Emancipation from slavery in 1863 posed distinctive religious challenges for African Americans in the South. When the Civil War finally brought freedom to previously enslaved peoples, the task of organizing religious communities was only one element of the larger need to create new livesto reunite families, to find jobs, and to figure out what it would mean to live in the United States as citizens rather than property. Melville J. Herskovits has advanced the thesis that the success of Baptists in attracting blacks was rooted in the appeal of immersion which suggests a connection in the slaves mind with the river spirits in West African religions. Others have attacked this position including, the black scholar E. Franklin Frazier who argues that enslavement largely destroyed the social basis of religion among blacks, and that the appeal of Baptists to blacks concerns the emotional content of their worship. Stanley Elkins (whose views were heavily influenced by what took place in the concentration camps of World War II Europe), has arguedlike Frazierthat slavery was so demeaning that blacks (like the Jews in the camps) were eventually stripped of every shred of dignity and humanity, including their faith. John Blassingame, on the other hand, has provided a significant body of evidence that blacks hung on to their religion as a form of resistance (11). African-American religion dealt with life as blacks lived it. It was about pain and sorrow, sin and shortcoming, pardon and joy, praise and thanksgiving, grace and hope. This version of Evangelicalism provided a wonderful benefit; it was able to accomplish great things in their lives that were frequently shouted about. This transition coincided with the period of intense religious revivalism known as awakenings. In the Southern states beginning in the 1770s, increasing numbers of slaves converted to evangelical religions such as the Methodist and Baptist faiths. Many clergy within these denominations actively promoted the idea that all Christians were equal in the sight of God, a message that provided hope and sustenance to the slaves (12). Slave Spirituals became the creative group expression of these aspirations. The Ring Shout was the most distinctive expression of religious worship in the praise service, with African-derived dancing and body movement emphasized. The invisible religion of the slave quarters also included conjure, a system of spiritual influence that combined herbal medicine with magic and sometimes gave surprising authority to slave practitioners who believed they could affect whites as well as blacks (6). They also encouraged worship in ways that many Africans found to be similar, or at least adaptable, to African worship patterns, with enthusiastic singing, clapping, dancing, and even spirit-possession. It was here that the spirituals, with their double meanings of religious salvation and freedom from slavery, developed and flourished; and here, too, that black preachers, those who believed that God had called them to speak his Word, polished their chanted sermons, or rhythmic, intoned style of extemporaneous preaching. The closest replication of their religious belief was the evangelicals’ approach. African Americans, often termed as ‘blacks’, was so closely intertwined with their total life experience that the starting point in understanding the meaning of that religious life must be the total life experience. For them, before they were forced to become unwilling participants in one of the most oppressive systems of slavery that the world had witnessed, the ancestors of the African Americans in Africa were very much a religious people. In their native land the totality of their lives was informed by what in western Europe was defined as religion, but what, to them meant as a basic and integral part of life (Jones 1991).Thus, they brought that religion with them. Blacks responded to the evangelical message, though, for different reasons than those advanced by slave owner-sanctioned preachers. The potential for spiritual equality, and even the hope for earthly liberty, could be taken from evangelicalism, and that was a powerful appeal to slaves. (8) Evangelicalism’s informal, spirit-driven style of worship could evoke remembrances of the religious ecstasies of African dance religions, another reason to embrace the faith. Nowhere else in southern society did African Americans find the status that they could achieve as in churches. Some African Americans worshipped in separate black churches, but black Baptists and Methodists had shaped evolving Evangelicalism in general since the earliest revivals. Most slave worship was in biracial churches. Evangelicalism took root among African-Americans. Large numbers underwent conversion, baptism, instruction, worship, and lived the life of Christian even in face of oppression. Although, the development of their own religious institutions would await Emancipation and the wars end, there were many thousands of Negro Baptists and Methodists by 1850. Emancipation brought many tangible rewards. Among the most obvious was a significant increase in personal freedom that came with no longer being someone elses property: whatever hardships they faced, free blacks could not be forcibly sold away from their loved ones. But emancipation did not bring full equality, and many of the most striking gains of Reconstruction — including the substantial political power that African Americans were briefly able to exercise — were soon lost. In the decades after Reconstruction African Americans experienced continued poverty and exploitation and a rising tide of violence at the hands of whites determined to re-impose black subordination. They also experienced new forms of discrimination, spearheaded by a variety of state laws that instituted rigid racial segregation in virtually all areas of life and that (in violation of the 14th and 15th Amendments) effectively disfranchised black voters. The struggle to overcome the bitter legacy of slavery would be long and arduous. Many abolitionists belonged to the African Methodist Episcopal Zion (AMEZ). AMEZ became a platform for preaching against slavery. The ministry was by far the most common occupation of the black leaders in the abolitionist movement (Sorin 101). AMEZ enabled people like Denmark Vesey to plan revolts. Pennington traveled as far as Europe to preach against slavery. He wrote, If the New Testament sanctions slavery, it authorizes the enslavement of whites as well as us (Voices of Triumph 127). Ward was born into a slave family that escaped in 1820. He lived in upstate New York and was an agent for the American Anti-slavery Society. Ward actively protested the Fugitive Slave Law of 1850. He was also an assistant to fugitive slaves (Voices of Triumph 145) (9). Over one hundred and thirty years after Nat Turner was hanged, black theology emerged as a formal discipline. Beginning with the black power movement in 1966, black clergy in many major denominations began to reassess the relationship of the Christian church to the black community. Black caucuses developed in the Catholic, Presbyterian, and Episcopal churches. The central thrust of these new groups was to redefine the meaning and role of the church and religion in the lives of black people. Out of this reexamination has come what some have called a Black Theology’. (10) The secret meetings of praise† of the former slaves was later institutionalized and these assemblies gave rise to independent churches. The first religious institution primarily controlled and administered by blacks was established at Silver Bluff, South Carolina in the 1770s.The Free African Society of Philadelphia, established in 1778 by two former slaves, Richard Allen and Absalom Jones was an example of one of the earliest formal organizational activity- more frequent among the free blacks in the urban North (Woodson 1922). Most of such groups were quasi-religious bodies and churches frequently came into existence from the membership of these societies. The Free African Society of Philadelphia, that newly created independent body, was the mother of two African Amertican churches- St. Thomas African Episcopal Church (later named the St. Thomas Protestant Episcopal Church) established in 1794, and the Bethel African Church (later becoming an independent organization known as the African Methodist Episcopal Church), which was the first black congregation in the Philadelphia Methodist Conference. In 1894 black Baptists formed the National Baptist Convention, an organization that is currently the largest black religious organization in the United States. There may be several reasons that evangelist were able to convert slaves, some would argue that this may be attributed to the verity that the slaves saw religion as the nearest observable fact to freedom. Still, it is quite notable that the evangelist were able to gather members not only because the African- Americans see their way of teaching as the nearest to their old rituals but also because of the evangelists’ unerring efforts to abolish slavery in the United States.

Tetracycline: History, Properties and Uses

Tetracycline: History, Properties and Uses Discovery and development of antibiotics-tetracycline Introduction An antibiotic is a single or a group of substances normally obtained from micro-organisms that block the development of a certain different micro-organisms or even destroy them. They are obtained from extraordinary microorganisms or other living frameworks, and are delivered by a modern method utilizing an ageing process. In spite of the fact that the standards of antibiotic activity were not found until the twentieth century, the first known utilization of antibiotic was from the Chinese more than 2,500 years back. Today, more than 10,000 anti-microbial substances have been accounted for. Right now, antibiotics are a billion dollar industry that keeps on growing every year.The variety of antibiotics presently available can be grouped by different methods like the chemical structure they are made of, the micro-organisms from which they are obtained, or the action they perform. They can also be designated by their range of action, e.g., Tetracycline, cephalosporin, polymixin etc. Tetracyclines It is a wide range polyketide antibiotic derived by the Streptomyces sort of Actinobacteria. [5]This is used against numerous bacterial diseases. It is a protein amalgamation inhibitor and is usually used to treat skin inflammation, rosacea, urinary tract infections and is truly imperative in decreasing the number of deaths from cholera. The term tetracycline is additionally used to indicate the four-ring arrangement of this compound; tetracyclines are connected substances that contain the same four-ring framework. http://www.explorecuriocity.org/portals/2/Symposia/Antibiotics/_2993.jpg http://cdni.wired.co.uk/19201280/a_c/antibiotics.jpg https://www.fredhutch.org/en/news/center-news/2004/03/infection-protection/_jcr_content/articletext/imageplus/image.img.jpg/1321308084306.jpg The discovery In spite of the fact that for a considerable length of time preparations derived from living organisms were applied to wounds to eradicate or remove diseases or ailments, the way that a microorganism is equipped for destroying one of other animal types was not proved until the last of the 19th century. The tetracycline, an expansive group of anti-infective agents, was founded as an ordinary item by Benjamin Minge Duggar in 1945 and initially endorsed in 1948.Under Yellapragada Subbarow, Benjamin Duggar made his discovery of the first tetracycline antibiotic- chlortetracycline (Aureomycin), at Lederle Laboratories in 1945. [9] In 1950, Harvard University teacher Robert Burns Woodward decided the compound structure of the related substance, Oxytetracycline (Terramycin); the patent security for its fermentation and generation was additionally initially issued in 1950. [8]An examination group of eight researchers (K.J. Burnings, Francis A. Hochstein, Frederick J. Pioneer C.R. Stephens, Lloyd Hillyard Conover, Abraham Bavley, Richard Pasternack, and Peter P. Regna) at Pfizeras ,a team with Woodward, took an interest in the two-year examination prompting the discovery. https://www.nzytech.com/site/components/com_virtuemart/shop_image/product/98d518eb90428466f73c1e04551cf1e7.jpg http://thescienceofacne.com/wp-content/uploads/Tetracycline-Sumycin-Molecule-640404.jpg?a355a6 https://edc2.healthtap.com/ht-staging/user_answer/avatars/1560705/large/open-uri20131228-9945-h4ifng.jpeg?1388269653 Development of antibiotics Antibiotics are made in the industry by a procedure of fermentation, where the source microorganism is developed in substantial holders (100,000 – 150,000 liters or additionally) containing a fluid development medium. The concentration of oxygen, degree of temperature, pH of the medium, and supplement levels must be idealistic and are closely observed and balanced if important. As antibiotics are optional metabolites, the population size must be controlled deliberately to guarantee that most extreme yield is acquired before the cells dies. When the procedure is finished, the antibiotic must be removed and decontaminated to a crystalline item.This is less difficult to accomplish if the antibiotic is dissolved in natural solvent. Else, it should first be uprooted by ion exchange, adsorbed, or precipitated on a chemical. Discovery of tetracycline Chlortetracycline and Oxytetracycline, both found in the late 1940s, were the first members from the tetracycline group to be portrayed.[4]These particles were results of Streptomyces aureofaciens and S. rimosus, individually. Different tetracyclines were distinguished later, either as characteristically happening atoms, e.g., tetracycline from S. aureofaciens, S. rimosus, and S. viridofaciens and demethylchlortetracycline from S. aureofaciens, or as results of semisynthetic methodologies, e.g., methacycline, doxycycline, and minocycline. In spite of the achievement of the early tetracyclines, analogs were looking for with an enhanced water solubility either to permit parenteral organization or to improve oral assimilation. These methodologies brought about the advancement of the semisynthetic mixes rolitetracycline and lymecycline. The most of late found tetracyclines are the semisynthetic collections alluded to as glycylcyclines, e.g., 9-(N, N-dimethylglycylamido) -6-demethyl-6-deo xytetracycline, 9-(N, N-dimethylglycylamido) -minocycline, and 9-t-(butylglycylamido) -minocycline.[12] These mixes have a 9-glycylamido substitution. .[11] The 9-t-butylglycylamido subordinate of minocycline (tigilcycline; once known as GAR-936) started stage- I in October 1999 and is as of now experiencing stage- II clinical trials. A portion of the prior mixes, e.g., clomocycline, are no more showcased, and others, e.g., rolitetracycline, lymecycline, and chlortetracycline, are not accessed. http://openi.nlm.nih.gov/imgs/512/272/2823312/2823312_ORT-1745-3674-80-693-g003.png http://media.i24news.tv/upload/cache/medium_image/upload/image/afp-ba034f876ea09e71954f1fda34f7c26ad79be9e6.jpg http://dailysciencejournal.com/wp-content/uploads/2015/01/bug.jpg Safety and environmental issues of the production and the product itself The large scale manufacturing of antibiotics started amidst World War II with streptomycin and penicillin. Presently, most antimicrobial agents are delivered by organized ageing. In this, strains of microorganisms delivering significant benefits are developed under ideal conditions in supplement media in aging tanks holding a few thousand gallons. The mold is strained out of the maturation soup, and afterward the antibiotic is expelled from the stock by filtration, precipitation, and other detachment systems. At times new antimicrobials are lab blended, while numerous antibiotics are created by artificially adjusting regular substances; numerous such subordinates are more powerful than the characteristic substances against contaminating creatures or are better consumed by the body. Potential problems with antibiotics-tetracycline Antibiotics are either infused, given orally, or applied to the skin. A number of them, while strong against infective agents, additionally cause lethal symptoms. Some, similar to penicillin, are exceedingly allergenic and can bring about skin allergies, shock, and different types of sensitivity to allergens.Others, for example, the tetracycline, bring about real changes in the intestinal bacterial and can bring about super infection by parasites and different microorganisms.[3,10] Tetracyclines ought to be utilized with caution in patients with liver weakness.[10]Those tetracyclines that are soluble in water and urine intensify renal failure (this is not valid for the lipid dissolvable operators doxycycline and minocycline). They may expand muscle weakness in myasthenia Gravis and compound systemic lupus erythematosus. [3] Quality control is of most significance in the generation of antibiotics. Since it includes a fermentation procedure, steps must be taken to guarantee that truly no defilement is presented anytime amid generation. At this end, the medium and the greater part of the equipment are completely steam cleaned. Amid manufacturing, the rule for the end product of antibiotics is to look out for a normalancy every now and then.Of specific significance are successive checks of the state of the antimicrobial culture during fermenting. These are done using different chromatography strategies. Additionally, different physical and chemical properties of the completed item are checked, for example, pH, liquefying point, and dampness content. . https://explorable.com/images/antibiotics.jpg http://a57.foxnews.com/global.fncstatic.com/static/managed/img/fn2/video/876/493/antibiotics%20in%20hand%20istock.jpg?ve=1tl=1 http://www.onlineclinic.net/images/blog/injectable-l.jpg Scope for improvement and future of antibiotics Since the development of a new medicine is a costly affair, pharmaceutical organizations have done almost no research in the most recent decade. Notwithstanding, a disturbing improvement has prodded a restored enthusiasm for the advancement of new antibiotics.[7] It just so happens, a part of the ailment causing microorganisms has altered and built up resistance to a large number of the standard antibiotics, including tetracyclines.[6] This could have grave outcomes on the worlds general wellbeing unless new antibiotics are found or enhancements are made on the ones that are accessible. This testing issue will be the center of exploration for a long time to come. Researchers are attempting to develop new methodologies to battle the developmental risk of micro-organisms that present antibiotics like tetracyclines cant battle. A few specialists are trying new substances; for example, silver, to consolidate with antibiotics to support their killing force.[2] Different scientists are making the utilization of hereditary sequencing of microbes to help create medications at a quicker pace than medical science was equipped for previously. Another system expects to render destructive microorganisms unequipped for contaminating individuals, as opposed to killing the micro-organisms through and through. One such procedure would kill infection, bringing about poisons by disturbing the microscopic organisms interior components. Conclusion Antibiotics, including tetracyclines have a limited lifetime in light of the fact that resistance is inevitable, therefore, theres dependably a need to innovate.[1] Bacteria have methods for shielding themselves against other microorganisms, and most antibiotics are obtained from the poisons they utilize. Distinguishing and growing new antibiotics is a long and moderate process. Whether the antibiotic will be valuable in treating individuals stays to be seen. The principle issue with recognizing new antibiotics isnt that they dont work. They work and yet they cause serious symptoms or danger. References Antibiotic Development: the Battle to Overcome Antibiotic Resistance. (1984). Inpharma, 437(1), 4-4. Averting the antibiotics apocalypse now. (2013). New Scientist, 217(2908), 3. Bevelander, G. (1963). Effects of Tetracycline. BMJ, 1(5322), 54-54. Chlortetracycline. (1999). Reactions Weekly, &NA;(773), 7-8. Filippova, S., Surgucheva, N., Gal’chenko, V. (2012). Long-term storage of collection cultures of actinobacteria. Microbiology, 81(5), 630-637. Litman, J. Antibiotic Resistance. SSRN Journal. NEW ANTIBIOTICS. (1976). Inpharma, 45(1), 12-12. Oxytetracycline (terramycin). (1955). Tubercle, 36(3), 92. TETRACYCLINE. (1954). The Lancet, 263(6813), 664. Tetracycline Hepatotoxicity. (1964). BMJ, 2(5424), 1545-1546. Tetracycline see Doxcycline/tetracycline. (1988). Reactions, 224(1), 8-8. Tetracyclines from Scratch. (2005). Science, 308(5720), 321e-321e.

Role Of 3d Animators In Motion Capture Film Studies Essay

Role Of 3d Animators In Motion Capture Film Studies Essay In the world of upcoming technologies and innovations it has become hard for traditional techniques to withstand. Same is the case here in terms of 3d animation which is become an integral part of the film industry here for a long time and the motion capture which is upcoming and is here to stay. Motion capture being the favourite of every live action movie director is gaining attention in the film industry. In producing entire feature films with Computer animation, the industry is currently split between studios that use Motion Capture, and studios that do not. Out of the three nominees for the 2006 Academy Award for Best Animated Feature, two of the nominees (Monster House and the winner Happy Feet) used Motion Capture, and only Pixars Cars was animated without Motion Capture. In the ending credits of Pixars latest film Ratatouille, a stamp appears labelling the film as 100% Pure Animation No Motion Capture! For 3D animations, objects are built on the computer monitor and 3D figures are rigged with a virtual skeleton. Then the limbs, eyes, mouth, clothes, etc.of the figure are moved by the animator on key frames. The differences in appearance between key frames are automatically calculated by the computer. To gain more control of the interpolation, a parameter curve editor is available in the majority of the 3D animation packages. The parameter curve editor shows a graphical representation of the variation of a parameters value over time (the animation curve). Altering the shape of the curve results into a change in interpolation and therefore into a change in the speed of motion. By changing the interpolation it is possible to avoid surface interpenetration (such as fingers intersecting each other) when transitioning from one hand shape to the next. The realism of keyframe animations depends largely on the animators ability to set believe keyframe (realistic hand shapes) and on his abil ity to control the interpolation between the keyframe i.e., the speed and fluidity of motion. Rendering takes place in the animation finally. History of 3D animation In the year 1824 Peter Roget presented his paper The persistence of vision with regard to moving objects to the British Society. In 1831 Dr.Joseph Antoine Plateau (a Belgian scientist) and Dr.Simon Rittrer constructed a machine called a phenakistoscope. This machine produced an illusion of the movement by allowing a viewer to gaze at a rotating disk containing small windows; behind the windows was another disk containing a sequence of images. When the disks were rotated at the correct speed, the synchronization of the windows with the images created an animated effect. Eadweard Muybridge started his photographic gathering of animals in motion. Zoetrope (series of sequential images in a revolving drum) when the drum is revolved the slits in the drum creates the illusion of motion and becomes first movie- similarly film creates this illusion by having one image then black then image then black again. Thaumatrope twirl it and the two images superimpose on each other. Two frame animation . In 1887 Thomas Edison started his research work into motion pictures. He announced his creation of the kinetoscope which projected a 50ft length of film in approximately 13 seconds. Emile Renynaud in 1892 combining his earlier inventions of the praxinoscope with a projector opens the Theatre Optique in the Musee Grevin. It displays an animation of images painted on long strips of celluloid. Louis and Augustine Lumiere issued a patent for a device called cinematography capable of projecting moving pictures. Thomas Armat designed the vitascope which projected the films of Thomas Edison. This machine had a major influence on all sub-sequent projectors. J.Stuart Blackton made the first animated film which he called Humorous phases of Funny faces in 1906. His method was to draw comical faces on a blackboard and film them. He would stop the film, erase one face to draw another, and then film the newly drawn face. The stopmotion provided a starting effect as the facial expressions changed b efore the viewers eyes. Emile Cohl makes En Route the first cut-out animation. This technique saves time by not having to redraw each new cell, only reposition the paper. Winsor McCay produced an animation sequence using his comic strip character Little Nemo. John R Bray applies for a patent on numerous techniques for animation. One of the most revolutionary is the process of printing the backgrounds of the animation. In 1914 Winsor McCay produced a cartoon called Gertie. The trained Dinosaur which amazingly consisted of 10,000 drawings. In 1914 Earl Hurd applies for a patent for the technique of drawing the animated portion of an animation on a clear celluloid sheet and later photographing it with its matching background (Cell animation). Cell and Paper Animation Technique: By the mid-1910s animation production in US already dominated by the techniques of cell and paper. Cell animation was more popularized in America than in Europe because of Assembly line Taylorism that had taken America by storm. Cell Animation was most appropriate to the assembly-line style of manufacturing because it took a whole line of persons working on very specific and simple repetitive duties. On the other hand, in Europe where the assembly-line style of work was not encouraged, clay animation and other forms of animation that required only a few individuals working on the set at a time was more popularized. Because the actual set could only afford a limited amount of individuals working at one time together and no more this style and other alternative forms of animation became more widely accepted. Disney-cell animation draw each image one at a time using onion-skinning technique. Traditional cell animation drawings created one by one animators create the keyframe and assistances create in-betweens; onion skinning process used to make easier the reference drawing of each additional image. The international feature Syndicate realised many titles including Silk Hat Harry, Bringing up Father and Krazy Kat. In 1923 the first feature-length animated film called El Apostol is created in Argentina. 1923 saw the discovery of Disney Brothers Cartoon Studio by Walt and Roy Disney. Walt Disney extended Max Fleischers technique of combining live action with cartoon characters in the film Alices Wonderland. Warner Brothers released The Jazz Singer which introduced combined sound and images. Ken Knowlton working at Bell Laboratories started developing computer techniques for producing animated movies. University of Utah, Ed Catmull develops an animation scripting language and creates an animation of a smooth shaded hand. Ref: E.Catmull,A system for computer generated movies, Proceedings of the ACM National Conference, 1972. Beier and Neely, at SGI and PDI respectively publish an algorithm where line correspondences guide morphing between 2d images.Demo is Michael Jacksons video Bla ck and White.Ref: T.Beier and S.Neely,Feature-Based image metamorphosis. Computer Graphics July 1992. Chen and Williams at the apple publish a paper on view interpolation for 3d walkthoughs.Ref: S.E.Chen and L.Williams,View Interpolation for image Systhensis. Computer Graphics Proceeding, Annual Conference Series1993. Jurassic Park uses CG for realistic living creatures. The stars of this movie directed by Steven Spielberg were the realistic looking and moving 3d-dinosaurs, created by Industrial Light and Magic. With each new step into the next generation of computer graphics comes new and more believable CGI characters such as those found in Dinosaur. In Dinosaur the creation and implementation of realistic digital hair on the lemurs is included. After seeing it, George Lucas, director of the Star War series, concluded the time was there to start working on his new Star Wars movies. In his opinion 3d-animation was now advanced enough to believably create the alien worlds and characters he already wanted to make since the early late seventies. In the year 1995 Toy Story the first full length 3D CG feature film. The first CGI feature-length animation and Pixars first feature film. The primary characters are toys in the room of this six-year-old boy Andy, and is mostly told from their point of view. On entrance of computers and 3d driven software feature length films of high polish can be created virtually in 3d. Toy Story is considered to be a first animated feature ever generated completely on computers. Disney and Pixar partnered up to create this film. Star Wars, almost every shot of this movie is enhancing with 3d-animation. It features very realistic 3d-aliens and environment. Lord of the Rings: Two Towers was the first Photorealistic motion captured character for a film; Gollum was also the first digital actor to win an award (BFCA), category created for Best Digital Acting Performance. MOTION CAPTURE Motion capture, motion tracking, or mocap are terms used to describe the process of recording movement and translating that movement onto a digital model. For medical applications and for validation of computer vision and robotics, and it is used in military, entertainment, sports too. To recording actions of human actors, and using that information to animate digital character models in 2d and 3d computer animation is how it is termed in film making. Performance capture is referred when it includes face, fingers and captures subtle expressions. Movements of one or more actors are sampled many times per second, although with most techniques motion capture records only the movements of the actor, not his/her visual appearance, in motion capture sessions. This animation data is mapped to a 3d model so that the model performs the same actions as the actor. Although there are many different systems for capturing motion capture data, they tend to fall broadly into two different categories: One contains optical systems, which employ photogrammetry to establish the position of an object on 3D space based on its observed location within the 2d fields of a number of cameras. Data is produced by these systems within 3 degrees freedom from each marker, and rotational information must be inferred from the relative orientation of the sensors with respect to a transmitter. Collecting of motion data from an image without using photogrammetry or magnetic equipment is referred to as motion tracking. In The Lord of the Rings in 1978, animated film where the visual appearance of the motion of an actor was filmed, then the film used a guide for the frame by frame motion of a hand-drawn animated character; the technique is comparable to the older technique of rotoscope. The camera movements can also be motion captured so that a virtual camera in the scene will pan, tilt, or dolly around the stage driven by a camera operator, while the actor is performing and the motion capture the camera and props as well as the actors performance. By doing this, it allows the computer generated characters, images and sets, to have the same perspective as the video images and sets, to have the same perspective as the video images from the camera. The actors movements are displayed through the computer process, providing the desired camera positions terms of the objects in the set. Match moving or camera tracking is referred to retroactively obtaining camera movement data from the captured footage. History of Mocap: The mocap technology of the modern day has been developed by the led in the medical science, army, and computer generated imagery (CGI) where it is used for a wide variety of purposes. Mocap had successful attempts long before the computer technology had become available. Early attempts: The invention of zoopraxiscope was because a of a bet of $25,000 on whether all four feet of a horse leave the ground simultaneously or not. Endeared Muybridge (1830-1904) who invented the zoopraxiscope was born in England and became a popular landscape photographer in San Francisco. Muybridge proved the fact that all four feet of a trotting horse simultaneously get off the ground. He did so by capturing a horses movement in a sequence of photographs taken with a set of one dozen cameras trigged by the horses feet. The earlier motion capture devices are considered to be zoopraxiscope. This technology was perfected by Muybridge himself. His books, Animals in motion (1899) and The Human Figures in Motion (1901) are still used by many artists, such as animators, cartoonists, illustrators, painters as valuable references. Muybridge is a pioneer of a mocap and motion pictures. In the same year a physiologist and the inventor of a portable sphygmograph was born in France and his name is Etienne Jules Marey. Sphygmograph is an instrument that records the pulse and blood pressure graphically. Modified versions of his instruments are still used today. Marey met Muybridge in Paris in the year 1882 and is the following year he invented the chronophotographic gun to record animal locomotion but quickly abandoned it, this invention was inspired by Muybridges work. He invented a chronophotographic fixed-plate camera with a timed shutter that allowed him to expose multiple images on a plate in the same year. The camera initially captured images on a glass plate but later he replaced glass plates with film paper, by this way film strips where introduced to the motion picture. Mareys subject wearing his mocap suit shows striking resemblances to skeletal mocap data in the photographs. Research subjects of Marey included cardiology, experimental physiology, instruments in physiology, and locomotion of humans, animals, birds, and insects. Marey used one camera in motion capture comparing to Muybridge who used multiple cameras. After the year in which Muybridge and Marey passed away Harold Edgerton was born in Nebraska. In the early 1920s Edgreton developed his photographic skills as a student while he studied at the University of Nebraska. While working on his masters degree electrical engineering at the Massachusetts in 1926 at the Institute of Technology(MIT), he realized that he couldnt observe the a part of his motor which is rotating as if the motor were turned off by matching the frequency of the strobes flashes to the speed of the motors rotation. Stroboscope was developed to freeze fast moving objects and capture them on film by Edgerton in 1913. Edgreton became a pioneer in high-speed photography. The first successful underwater camera in 1937 was designed by Edgreton and made many trips abroad the research vessel Calypso with French oceanographer Jacques Cousteau. The design and building of deep sea flash electronic equipment in 1954 was done by him. Edgreton passes away in 1990 where his long career as an educator and researcher at MIT. Rotoscoping: Max Fleisher and art editor for Popular Science Montly who was born in Vienna in 1883 who moved to the U.S with his family, he came up with an idea of producing animation by tracing live action film frame by frame. Fleisher filmed David his brother, in the year 1915 in a clown costume and they spent almost a year making their first animation using rotoscope. He obtained a patent for rotoscope in 1917.In the year 1918 when World War I ended he produced the first animation in the Out of the Inkwell series and he also established Out of the Inkwell,Inc.,which was later renamed as Fleischer Studio. In this series the animation and the live action was mixed and Fleischer himself interacted with animation characters, Koko the clown and Fitz the dog. Before Disneys Steamboat Willie, in the year 1924 thats 4 years before he had a synchronised soundtrack. Characters such as Popeye and Superman were all animated characters from Fleischers studio. Betty Boop first appeared in Fleischers animati on and later became a comic strip character. In 30s early animations were filled with sexual humour, ethnic jokes, and gags. When the Hays Production Code (censorship) laws became effective in 1934 it affected Fleischer studio more than other studios. Betty Boop lost her garters and sex appeal as a result. After almost after 4 years of production Walt Disney presented the first feature length animation, Snow White and Seven Dwarfs. Snow White was a huge success. The distributer of Fleischers animation Paramount pressured Max and David Fleischer to produce feature length animations. The two feature films Gullivers Travel (1939) and Mr. Bugs Goes to Town (1941) were produced by the money borrowed from Paramount. Both of the films were a disaster in the box office. The failure of Mr. Bug made Paramount fire the Fleischer brothers and changed the studios name from Famous Studios. Max Fleischer sued Paramount over the distribution of his animations. He signed a Betty Boop merchandising deal for King Features, a unit of the Hearst Corporation before he died in the year 1972. The use of Rotoscoping can be seen in the Disney animations, starting with Snow White. Later Disney animations characters were highly stylized and Rotoscoping became a method for studying human and animal motions. Comparison between film footages and the corresponding scenes in the animations reveals skilful and selective use of Rotoscoping by Disney animators. They went above and beyond Rotoscoping. Snow Whites can be attributed to Walt Disneys detailed attention to the plot, character development and artistry. Both Max Fleischer and Walt Disney were highly innovative individuals; however, it is said true that Disneys memory belongs to the public; Maxs to those who remember him by choice (Herald son, 1975). Beginning of Digital Mocap: In the 1970s the research and development of digital mocap technology started in pursuit of medical and military applications. In 1980s CGI industry discovered the technologys potentials. In the 1980s there were floppy disks that were actually floppy and most computers were equipped with monochrome monitors; some with calligraphic displays. To view color images, for example rendered animation frames, images had to be sent to a frame buffer, which was often shared by multiple users due to its cost. Large computers were housed in ice cold server rooms. Offices were files with the noise of dot matrix printers. In the 1980s ray tracing and radiocity algorithms were published. Based on these algorithms renderers required a supercomputer or workstations to render animations frames in a reasonable amount of time. Personnel computers werent powerful enough. CPUs, memories, storage devices, and applications were more expensive than today. Wavefront technologies developed and marketed the firs t commercial of the shelf 3D computer animation software in 1985. At that time only a handful of animation production companies existed. Most of the animations that they produced were flying logos for TV commercials or TV programmes opening sequences. The pieces were 15 to 30 seconds long. In the 1980s the readers who saw Brilliance probably still remember the astonishment of seeing a computer generated character, a shiny female robot, moving like a real human being. Brilliance being the first successful application of mocap technology in CGI,Total Recall was the first failed attempt to use mocap in a feature film. The post production companies contracted to produce effects for the 1990 science fiction film starring Arnold Schwarzenegger and Sharon Stone, Metrolight Studio being one of them. Metrolight decided to use mocap to create an animation sequence of moving skeletons for the scene in which Schwarzeneggers character goes through a large airport security X-ray machine, along with other people and a dog. Operator from an optical mocap equipment company was sent out to a location with mocap system. A team from metrolight followed the operators instruction while capturing performances by Schwarzenegger and other performers. They went home believing that the capture session had gone well and the mocap company would deliver the mocap data after cleaning and processing. What so ever metrolight never received usable data and had to give up using mo cap for the scene. Metrolights unfortunate experience teaches us one lesson that we should hire only a service provider with a good track record and references. In 1995 FX Fighters released its first real-time fighting with 3D characters in 3D environments. Its also one of the first video games that used mocap technology to give realism to 3D characters movements. By the user input using a set of motion captured actions, game characters are animated in real time. The pieces of actions are played in such a way that the player does not notice the transition from one action to another giving an impression that the player is fully in control of a game characters movement. Seeing the success of the game, other game companies were encouraged to use mocap in their games. In the 1980s and 1990s these pioneering efforts have shown remarkable development and achievement in digital mocap. In the recent years, in addition to medicine, and entertainment, mocap applications have been found in many other fields. Mocap is used by various sports to analyze and enhance the athletes performances and prevent injuries. Designers use mocap to understand users movements, constrains, and interactions with environments and to design better products. Mocap is used by engineers to analyze human movements and design robots that walk like us. Mocap is also used by art historians and educators to archive and study performances by dancers and actors. For instance, in 1991 an intricate performance by legendary French mime Marcel Marceau (1923-2007) was captured at the Ohio State University to preserve his arts for future generations. 3D ANIMATION PRODUCTION PIPELINE Sales pitch Convincing the big jobs to work on the story. Story plot solid summary What the films about, what happens in it and extra variations that may or may not appear in the final product. Storyboards Basic sketches of the scenes. (Time usually taken = 6 months) Voice recording At first the artists themselves do the voice acting to put a connection from the story board to the script to give an idea of the film, later on celebrities are paid to be the character voices. Storyboard reel Pictures in a timescale with voice recordings playing in conjunction, basically a really basic film. Concept art Artists try to create the look and feel of the scenery and the characters from the scripts, voice talent and the basic drawings, the artists get first crack at how lighting sets the mood too Modelling The characters, props and landscape have started to be created in 3d; hinges have been added to them to give them movement. Everything is still in frame form, no textures have been added yet (think skeletons). Dressing The models and props are skinned according to the mood and feel the team wants for the film to portray. Shot layout The Basically skinned objects and characters are set into positions to work out camera angles and movement, nothing is truly animated or skinned yet, the recordings of these final cuts are passed onto the animation team. (Time Usually taken = 4 weeks) Animation The models are animated, everything such as the skeleton is already there so they are basically choreographers (think puppeteers). They move the mouth and ligaments according to the sounds and the scripts. (Time usually taken 4 weeks) Shading shading changes surfaces according to the lighting on it, it affects the models colour depending on the lighting situation e.g. light bouncing off a shiny metal surface is successfully done thanks to a shader. Shaders are added to the landscapes, models and props. Lighting Lighting is added to the scenes, Lighting is what actually makes everything look great. Lighting is based on the mood scripts. (Time usually taken = 8 weeks) Rendering The final product is rendered; this can take a hell of a lot of time to render one frame depending on the quality of the graphics put into. Touch-ups Things such as music scores, special effects and sound effects are added, the film is also recorded to an appropriate format. MOTION CAPTURE PRODUCTION PIPELINE Pre-Production Storyboard development Shot analysis It is important to work out exactly what action is needed at this stage, plus any restrictions which may impede the actor. There are several factors which need to be addressed: Does the actors size correspond to that of the character. Should the actor have any props, or costume (for example having the actor where horns for your demon character in your mocap session, will prevent the arms going through the horns at the implementing stage) The spatial surrounding should be a factor. Will the motion need to be blended (e.g. A running motion, as the motion capture studio will only capture a fragment of the run). Character Rigging Develop a character rig, which involves the following: Matching the actors size as much as possible. Constraining the joints. Problems may include exporting out of your animation package into the correct format (e.g. .xsi into fbx) Several different export formats should be tested to realize which suites best with the character rig (e.g. .bvh, .fbx, etc). Actual Motion Captured This can be viewed on a rig in real time. There are several different forms of Motion Capture devices. The most commonly used are: Mechanical, Optical, and Electromagnetic (magnetic) Cleaning Data This involves several data manipulators being applied to the motion capture data. In optical motion capture systems, for example, after you capture the movements of your actors, the data is stored as raw 2D data. Reconstruction process will convert it into continuous 3D trajectories. Label process will label all the trajectories and so on. Additional processing may be needed when there are data gaps, jitters and other data-noises. Implementing data This is simply the process of applying your data to your skeleton rig provided at the initial stages. There can be several problems at this stage depending on the formats and animation package chosen. For example there is an issue with UVs, materials, scaling etc. It is suggested you follow each package pipeline to minimize these issues. APPLICATIONS OF MOTION CAPTURE The process of recording movement and translating that movement onto a digital model is called as motion capture, motion tracking or mocap. Its applications are used in the military, entertainment, sports, medical applications and for validation of computer vision and robotics etc. Games The largest market for motion capture is game development. Games are drawing as much revenue as movies; it is easy to see why game development often calls for enormous quantities of motion capture. There are basically two types of 3d character animation used in games: real time playback vs. Cinmeatics. Real-time allows the game player to choose from pre-created moves, by controlling the characters moves in real-time. Cinmeatics are the fully rendered movies used for the intros and cut-scenes. Often the last part of game production, or a process that is sub-contracted to a separate studio,cinematics are generally not essential to game-play, but do add a lot of appeal to the game, and help immensely with story development and mood generation. Video and TV Performance animation In live television broadcasts real-time motion is becoming popular. Using motion capture we can place a virtual character within a real scene, or to place live actors within a virtual scene with virtual actors, or virtual characters with a virtual scene. For real time broadcasting mocap requires mocap-up of any non-standard physiology to keep the performers motion from causing the characters limbs to interpenetrate its body. Joints limits on the shoulders and knees also help maintain believability of the character. A real-time adaptation feature such as motion builders real-time motion mapping is essential when the character body is very different from the actors body. While combining live elements with virtual elements the real and virtual cameras must share the same properties otherwise the illusion looks strange. Daily features Producing daily 3d animated features becomes easy with use of the phasespace optical motion capture system combined with motionbuilder.,allowing TV stations to keep their content fresh and exiciting,and giving viewers yet another reason not to touch that dial. Post-Production for ongoing series using motion capture for ongoing series is gaining popularity. The result of creating a weekly show without motion capture invariably causes shows to be late or production studios to go bankrupt. Having an efficient motion capture pipeline is essential to the success of an ongoing character animation based series. Film The use of motion capture in the films is increasing day by day. For creating character based animation motion capture is essential that move realistically, in situations that would be impractical or too dangerous for real actors.eg. Titanic were characters falling down off the ship. Motion capture was used extensively in Titanic for filler characters. Many of these shots would have been difficult or impossible to do with real cameras and a real ship, or real models, so virtual models, actors, and cameras were used. Some film characters require the use of motion capture, otherwise their animation seems fake. More and more independent companies are starting to put together desktop studios-the idea of two or three people creating an entire movie are not far off, if motion capture is used correctly. Motion capture animation can be done very quickly and inexpensively, without scheduling expensive motion capture sessions in a studio. Web Motion capture is ideal for the web, whether used to create virtual hosts or greeting cards. Motion capture brings a human element to the web as the web becomes more sophisticated and bandwidth increases, in the form of characters that viewers can relate to interact with. Live events Motion capture generated performance animation can be thought of as Improvisation meets Computer Graphics (CG). A good improviser acting through a CG character in real-time can create a very intriguing lass sting experience for the viewer at trade shows, meetings or press conferences. Integrating with live actors father helps create a fascinating experience. Scientific research While doing perceptual research motion capture is useful. By presenting test subjects with abstract movements, distilled from motion capture data, repeatable experiments can be developed that provide insights into human perception. Biomechanical analysis Motion capture is relied by biomechanical analysis for rehabilitation purposes. Motion capture can be used to measure the extent of a clients disability as well as a clients progress with rehabilitation. Motion capture can also help in effective design of prosthetic devices. Engineering For producing ergonomically practical product designs motion capture is essential, as well as designs for physical products that are comfortable and appealing. When it comes to working in an enclosed space, the gypsy has tremendous advantages over optical or magnetic systems, such as a car inter

Cultural Impact of Hinduism in India Essay -- Cause Effect India Essay

Cultural Impact of Hinduism in India Huge population, pollution, peace, snakes, saris, dance, curry, and religion are probably the most popular words that come up when we think about India. India is a well-known country. Although it is a relatively poor country, it has a rich and diverse culture. India is populated by approximately 953 million people. It has been a home for many religions, including Hinduism, Buddhism, Sikhism, Jainism, Islam and Christianity. The first four mentioned above originated in India (Finegan 151). Seventy percent of the populations are Hindus. In fact, Hinduism is the oldest and third largest religion in the world. Hinduism has deeply influenced Indian society, for several reasons: it has a long history in this place, it is related to the social status of Indians, and it is integrated with the cultural aspects in India. Hinduism has faith in the deity that is visualized in a triad. They are Brahma, the creator; Vishnu, the preserver; and Siva, the destroyer. The article about Hinduism in the www.religioustolerance.org states that there are thousands of gods that Hindus believe, but generally there are two major sects in Hinduism; the Vaishnavaism – esteems Vishnu as the supreme god, and Shivaism – esteems Siva as the supreme god. Like other religions, Hinduism has books that give its followers directions for living. They are the Vedas and Upanishads, and epics such as Mahabarata, Ramayana, and Bhagwad Gita. The Vedas is the most fundamental book for Hindus. It was dictated by the god Syva's son, named Ganesha. In Hinduism, the basic goals of life called purushartha or "The Four Ends of Man," include dharma (acting righteously and fulfilling one's duties), artha (money, prosperity, or wealth... ... Because of its long tradition, its links to social status and its integration with cultural activities, Hinduism has had an enormous influence on Indian society. It is not only a religion, but also a way of life for Indians. Works Cited Chopra, P.N., ed. Religions and Communities of India. Atlantic Highlands, NJ: Humanities, 1982. "Culture". Welcome to India (1999). 8 Mar. 2000 <http://www.welcometoindia.com/home.html>. de Bary, Wm. Theodore, ed. Sources of Indian Tradition. New York: Columbia UP, 1960. Finegan, Jack. India Today! St. Louis, Missouri: The Bethany Press, 1955. "Hinduism". Religious Tolerance Organization (1999). 8 Mar.2000 <http://www.religioustolerance.org/hinduism.htm>. Sharma, Arvind, ed. Our Religions. San Francisco: Harper Collins Publishers, 1995. Weber, Max. The Religion of India. Illinois: Glencoe, 1962.

American high schools not up to par :: essays research papers

American High Schools Not Up To Par There are many factors that would lead someone to believe that high school is a waste of time. High school has too many distractions for kids to try to concentrate on learning. Since the Columbine tragedy police officers have moved into most high schools and created a distraction for most students. During the day students have study halls that are a huge waste of time, while this time could be utilized to have more instruction or tutoring for kids. Every student is different and has a different learning style. Yet schools don’t separate kids by their learning style to help maximize their curriculum intake. Students are also forced to take classes that they have no interest in and will not be used in their future. All these reasons show how school has too much wasted time and is not doing what it school is intended to do.   Ã‚  Ã‚  Ã‚  Ã‚  During the school day students are faced with many distractions that may keep them from doing their best. Since all of the school shootings in recent years schools have beefed up security across the country. Students are faced with metal detectors as they walk in the school doors. Dogs are used in the schools to conduct random searches and some students find this very controversial. Students are violent and are bringing weapons to school and making bomb threats. These can cause lockdowns that can take hours to search the whole school. This is all valuable time taken from the school day. Police officers are also a new presence in the school system that intimidates students. School is supposed to be a place of learning but now students have to worry if they are safe when they go to school. All these distractions have some students scared to go to school. Every one of these distractions creates an environment that is not conducive to learning.   Ã‚  Ã‚  Ã‚  Ã‚  Almost every student has had a study hall. Study halls are a huge waste of time because students end up just sitting around getting themselves into trouble. How is one to study when these are quiet study halls? Studying is much easier with a partner where each can quiz each other aloud. With block scheduling students can waste eighty minutes a day if they have a study hall. That’s an hour and twenty minutes where a class of importance could be put in.

Women’s New Role Essay -- Essays Papers

Women’s New Role In coming to understand what it meant to be a girl I was affected by my era, women’s sports, and the place that I was raised, as much as the independent feminist spirit that my mom was exposed to and possessed. My mother’s mom raised her to believe and accept the traditional female role. My grandmother put emphasis on the women staying home and existing solely as a support system for the man. She found comfort and security knowing that it was the man’s burden to â€Å"bring home the bacon.† My mother, however; was influenced by the time and took it upon herself to take care of herself and make her own money. At a young age she along with many other women of her time wanted to rebel against the expected role and thus have a more fulfilling life. Family and children were an important priority for her but she felt strongly that she could do more. Her parents had a wonderful and loving relationship but her father had three massive heart attacks at age 42 a nd was not suppose to live a year. My mother was one of the oldest of eight children and was well aware of her mother’s very frightening predicament. This aforementioned life experience and her inherent desire to educate herself made her believe that women could do more. My mother did want to marry but wanted to be in the marriage because she wanted to not because she had to stay in an unpleasant situation. She wanted to make it on her own. She did not want a man to control her and most of all to tell her what to do. Her competitive drive for success in the business world was luckily passed on to me and gave me the confidence and perseverance that I need to get through life. My mother taught me that I was a woman, so things may be harder and that I must never e... ...s influential as my role models on the women’s US national team. They all gave me the courage and confidence in myself as a woman. Today I am happy to see that women are coming together and trying to inspire each other to take on the world. By simply typing in â€Å"Women Role model† in goggle I found several sites for women engineers, doctors, and writers trying to make something out of their lives. I was happy to see that someday when my daughter is trying to pursue her dream that she will have options because of the risks these women took. And I will be proud to be able to say that I was one of those women. Work Cited Dorance, Anson. Telephone interview. 29 May 2003. Gonzales, Monica. Personal interview. 30 May 2003. Hamm, Mia. Go for the Goal. HaperCollings. NY 1999. Lilly, Kristine. Personal interview. 30 May 2003. UNCtarheel.com.May 31 2003.